When you've finished scanning press the 'save' button.
(note: the save button can be pressed any time whilst scanning – the status bar changes from 'unsaved scans' to 'All scans saved'. The device automatically saves any scans every 5 minutes to protect against data loss from the battery going flat.
Warning: if the device is left flat for an extended period this data will be lost as will the program and the MCxx will require reloading with the software. Get in the habit of leaving the scanner in the charging cradle when not in use.
Put the Scanner in the cradle and the MC50 will synchronise with the PC
NOTE: if you are using multiple scanners with one PC you must select the scanner using the Scanner Selector Utility. See using multiple scanners with one PC below
Open an Equipment List in Eclipse
Press the 'Import' button
Once the list has been imported and any problems dealt with then you can clear the scanners memory. The memory is not automatically emptied in case any problems occur during the hotsync.
Press the 'Clear' button to clear the scanner
Start scanning again