The originating location of the equipment list is set by default from the General Page of the Job Book. However, when required, you may need to select a shipping method to get the equipment from one site to your site. Typically, you will use the standard method of shipping, but occassionally, you may use an express method of shipping such as overnight delivery. These shipping methods become critical when calculating the availability of the equipment in another site.
Example: You have configured the standard shipping method to take 72 hours to get equipment from site 1 to site 2, and you have also set the express shipping method to take 24 hours. Site 2 has an event that begins on Thursday that requires a microphone. Site 1 has an event that requires that microphone until Tuesday. If the user selects the standard shipping method, the microphone is not available because there isn't enough time to transport the microphone between sites. However, the user then toggles his site to express method of shipping, and the microphone is now available as it only takes 24 hours to ship using an express method.
To set the shipping method from the other locations:
1.
Drop Down Window located below Checking From:
2.
Select the shipping method for each location. If you select Off, that location will not be available as a choice on this equipment list.
